26
'10
Written on
MAPLESOFT
26
'10
Written on
MAYR
Innovative brake system increases safety of vertical axes
If there is a danger of falling loads on vertical axes in areas where personnel have to work, additional measures must be taken to minimise the risk of accidents. The Mauerstetten brake specialist mayr® power transmission has developed brake systems which are capable of providing safety in any critical situation occurring during vertical axes operation.
22
'10
Written on
HMS Industrial Networks AB
The fastest way to support PROFIenergy
HMS supports the “green automation initiative” of the automobile manufacturers with the release of an embedded Anybus-CompactCom PROFIenergy communication module.
17
'10
Written on
Amixon GmbH
Amixon VM: New mixer generation with total emptying
At first sight, every industrially applicable mixing principle already seems to be invented for the solids mixing technology. These processing machines however are continuously refined and improved. Their objective, amongst other things, is to simplify the production of appliances. The refinement furthermore aims at increasing the user advan-tages for the operator and enhancing the production processes. The engineers also focus on the optimisation of the hygiene and the mixing quality. This is where amixon GmbH introduces a new development, which enables an almost complete removal of the mixed product, without leaving any residues whatsoever, from the mixer.
12
'10
Written on
HMS Industrial Networks AB
CANopen X-gateway Family
The new Anybus X-gateway series connects CANopen networks with 10 other fieldbus and industrial Ethernet networks
12
'10
Written on
REDEX
High-Speed Fiber placement on large complex structures
Reducing aircraft weight is essential to boosting fuel efficiency. Not only is it very important in terms of cost, but also given the ever-increasing distances that airplanes of the future are expected to travel more capacity is essential. Carbon fiber's high strength to weight ratio is one of the main innovations today, but the need for high production rates requires extremely complex machines. Electroimpact has developed an outstanding solution offering a 2000 inch per minute (50-meter per minute) automated fiber placement speed. This means a very sophisticated control system and very stable and accurate axes drive systems. Andantex USA provided all the critical mechanical components to drive the axes.
12
'10
Written on
CIAT
OPERA
OPERA is CIAT’s latest range of drycoolers and air-cooled condensers. An economic solution, based on standard modules, OPERA is available in more than 4500 models, which adapt perfectly to many different applications. Whilst offering the same output, its energy efficiency is 15% better than that of previous generations. This ratio can be as much as 50% depending on options. Available power ratings go up to 1100 kW.
11
'10
Written on
ARNOLD UMFORMTECHNIK
Alufast® fasteners facilitate lightweight construction
Alufast® aluminium screws from Arnold Umformtechnik are especially advantageous for joining magnesium components: transmission, housing, load-bearing, stiffening... Especially with material pairs exposed to thermal stress, they significantly enhance the security of threaded fastener joints. Furthermore, Alufast® aluminium screws weigh only one-third as much as equivalent steel screws. Particularly with large volumes the weight savings can amount to the equivalent of several metric tons of steel per year.
05
'10
Written on
NORD Drivesystems
Drives and inverters for a new bottling plant
Nord Drivesystems provides drives and gears for the packaging, palleting and transport technology systems designed and installed by BMS Maschinenfabrik in the new factory of the Hacklberger Beverage company. Decentralised capability, high positioning accuracy and low energy consumption of the Nord Drivesystems solutions are key success factors for this new installation producing up to 36 000 bottles per hour.
05
'10
Written on
SOURIAU – SUNBANK Connection Technologies
